Firegear Outdoors
Brass burner systems and the LUME smokeless insert.
- Headquarters
- Huntington, Indiana Source
- Ownership
- Owned by Earthcore Industries of Jacksonville, Florida, in an acquisition announced on February 6, 2026. Source
- Where made
- No country of manufacture is stated. Earthcore's release says the acquisition includes a 57,000-square-foot manufacturing and distribution facility in Indiana. Source
- Warranty
- For consumer use, on products made after 2026-01-01: lifetime on stainless steel burners and pans and on Pro Series burners; 5 years on gas valves, spark igniters, pilot assemblies, TPSI electronic components and match throw (key valve) components; 3 years on AWS electronic ignition and on the Sanctuary GFRC structure. Commercial terms are shorter on burners and ignition (2 years on burners and pans, 1 year on AWS). Claims are made by the distributor or dealer account on the buyer's behalf. Source
- Sanctuary output
- The product pages list outputs of up to 110,000 BTU for the Sanctuary 1-56, 150,000 for the 1-76, 145,000 for the Sanctuary 2 and 75,000 for the Sanctuary 3. The range depends on the burner and fuel. For the 1-56, the page lists 100,000 for the stainless burner and 80,000 (natural gas) or 110,000 (propane) for the Pro Series burner, while the 1-56 installation manual lists 75,000 on natural gas. Firegear's two documents disagree, so confirm the output for your burner and fuel. Source
- Sanctuary propane tank
- The Sanctuary 1 manual says not to place an LP tank inside any fire feature enclosure. The tank goes in an approved separate enclosure at least 60 in. from the Sanctuary 1. Firegear lists an optional 20 lb tank enclosure, SANCTUARY-LPTE, a concrete enclosure listed at 20 x 21.5 in. tall that weighs 141 lb and has a removable lid. Source
What They Make
Firegear Outdoors, of Huntington, Indiana, mostly makes the hardware that goes inside a gas fire pit. Earthcore Industries of Jacksonville, Florida, owns the company, in an acquisition announced on February 6, 2026.
The Pro Series puts brass burners in stainless pans, as round, square, linear H and linear T systems in flat-pan or drop-in form. Pro Spur burners come in 10, 14 and 21 in, rated 80,000, 125,000 and 175,000 BTU on natural gas. Pro H burners run from 24 to 80 in, at 80,000 to 250,000 BTU on natural gas. The standard line does the same job in stainless steel. Block Burner Systems are built for segmental retaining wall block and paver pits.
Finished pieces are a smaller part of the line. Sanctuary is a GFRC fire table and bowl series, with outputs of up to 110,000 BTU for the 1-56, 150,000 for the 1-76, 145,000 for the Sanctuary 2 and 75,000 for the Sanctuary 3 on the product pages. Abode and Levelle add a GFRC fire and water bowl and a steel fire bowl. Kalea Bay is an outdoor gas fireplace in 36, 48, 60 and 72 in models. The AWS system handles ignition for one or several fire features. The LUME, a stainless insert for wood-burning pits, is the one wood product in the line.
Firegear Outdoors collections, as the manufacturer lists them
Pro Series burner systems
Source- Category
- Gas burner systems for flat-pan or drop-in pits
- Materials
- Brass, stainless
- Fuel
- Natural gas, propane
- Ignition
- Match throw, electronic (AWS), thermopile (TPSI)
- Notes
- Round, square, linear H and linear T systems with brass burners in stainless pans. A 21 in Pro brass spur burner in 19 to 30 in pans is listed at 175,000 BTU on natural gas and propane.
Pro Spur burners and kits
Source- Category
- Brass burners and burner kits
- Materials
- Brass
- Fuel
- Natural gas, propane
- Ignition
- Not stated
- Notes
- 10, 14 and 21 in Pro Spur burners. The 10 in is 80,000 BTU on natural gas and 95,000 on propane; the 14 in is 125,000 and 160,000; the 21 in is 175,000 on both. Ignition depends on the kit.
Pro H burners and kits
Source- Category
- Brass H burners and burner kits
- Materials
- Brass
- Fuel
- Natural gas, propane
- Ignition
- Not stated
- Notes
- 24, 30, 40, 50, 60 and 80 in. H burners, each 6.75 in. wide. Input runs from 80,000 to 250,000 BTU on natural gas and 110,000 to 240,000 on propane. The manual lists the 30 in. natural gas burner at 90,000 BTU on its cover and 95,000 in its Table 2, so it disagrees with itself on that one figure.
Stainless burner systems and burners
Source- Category
- Gas burner systems and burners
- Materials
- Stainless
- Fuel
- Natural gas, propane
- Ignition
- Match throw, electronic (AWS), thermopile (TPSI)
- Notes
- Round, square, linear H and linear T systems, plus Burning Spur, Fire Ring, H and T burners. Outputs are in the product manuals.
Block Burner Systems
Source- Category
- Burner systems for block and paver pits
- Materials
- Stainless, brass
- Fuel
- Natural gas, propane
- Ignition
- Match throw, electronic (AWS), thermopile (TPSI)
- Notes
- Pro Series and stainless block burner systems for segmental retaining wall (SRW) block and paver pits, with control panel kits and vent kits.
Sanctuary Series
Source- Category
- GFRC fire tables and bowls
- Materials
- GFRC
- Fuel
- Natural gas, propane
- Ignition
- Electronic (AWS), match throw, thermopile (TPSI)
- Notes
- Sanctuary 1-56, 1-76, 2 and 3. The Sanctuary 1-56 is 56 x 38 in, listed at 75,000 BTU on natural gas in its installation manual (Rev. C). Its product page lists different outputs, so see the Sanctuary output fact above.
Abode and Levelle
Source- Category
- Fire and water bowl, steel fire bowl
- Materials
- GFRC, steel
- Fuel
- Gas
- Ignition
- Not stated
- Notes
- The Abode is a GFRC fire and water bowl. The Levelle is a steel fire bowl.
The LUME
Source- Category
- Smokeless insert for wood-burning pits
- Materials
- Stainless
- Fuel
- Wood
- Ignition
- Not stated
- Notes
- LUME Insert, Double Wall Insert and Surround 1 and 2. Firegear describes it as a smokeless insert that turns an ordinary wood-burning fire pit into a cleaner-burning one. It drops into segmental retaining wall block, brick or other non-combustible pits in 29, 34 and 36 in. The Surround 2 line also lists burner systems.
Kalea Bay
Source- Category
- Outdoor gas fireplace
- Materials
- Steel
- Fuel
- Natural gas, propane
- Ignition
- Electronic
- Notes
- LED and battery models and see-through conversion kits, in 36, 48, 60 and 72 in models at 31,000, 43,500, 50,000 and 65,000 BTU on natural gas at high. Natural gas, convertible to propane. Steel firebox.
AWS ignition system
Source- Category
- Electronic ignition for one or several fire features
- Materials
- Not stated
- Fuel
- Natural gas, propane
- Ignition
- Electronic (AWS)
- Notes
- All Weather electronic ignition, available for single and multiple fire features.
Each row links to its source. Checked . Every source is listed under Sources.
How to Tell Their Pieces Apart
Burner material is the first split: brass in the Pro Series, stainless in the standard line. Both come with three ignition families, named in Firegear's own terms. MT is match throw, with a key valve. AWS is the all-weather electronic system. TPSI is the thermopile system, which Firegear calls High Capacity.
Read the certification statements closely. Firegear's manuals say the AWS valve and control system is certified by Lab Test for the US and Canada to ANSI Z21.97-2014. That statement covers the component and is not a listing for the whole system. The Kalea Bay manual says it was tested and approved to ANSI Z21.97-2017 / CSA 2.41 by the PFS agency under listing #20-024. The match throw and Pro Spur manuals we read state no listing, so ask your inspector which listing they require.
Check the output figures against the manual for your exact model. The Sanctuary 1-56 manual lists 75,000 BTU on natural gas, and the 1-56 product page lists 100,000 for the stainless burner. The Pro H manual lists the 30 in. natural gas burner at 90,000 BTU on its cover and 95,000 in its table. Firegear's documents disagree on both, so ask Firegear which figure applies before you size a gas line.
Propane on a Sanctuary needs planning. The Sanctuary 1 manual says not to put an LP tank inside the enclosure. The tank goes in an approved separate enclosure at least 60 in. from the unit, and Firegear lists a 141 lb concrete tank enclosure with a removable lid, SANCTUARY-LPTE, as an option.
The LUME is built for wood-burning pits, so it plays no part in choosing a gas burner.
Who It Suits, and Who It Doesn't
In our view, Firegear fits a landscaper or do-it-yourself builder putting a gas burner into a paver or block pit, and a buyer who wants brass. Most of the line is burners, pans and kits built into a masonry or block pit, which is why we read it that way.
It's a weaker fit for someone who wants a finished freestanding table, because the GFRC range, Sanctuary, is small.
Firegear's warranty is lifetime on its stainless steel burners and pans and on Pro Series burners for consumer use, 5 years on valves, igniters, pilots, TPSI parts and key valves, and 3 years on AWS ignition and the Sanctuary GFRC structure. It applies to products made after January 1, 2026, and claims go through a distributor or dealer account, so ask whoever sells you the product who files them.
The LUME is a wood product, so it doesn't apply if you're buying gas.
Common Questions About Firegear Outdoors
Who owns Firegear Outdoors, and where are Firegear products made?
Firegear Outdoors, of Huntington, Indiana, is owned by Earthcore Industries of Jacksonville, Florida, in an acquisition announced on February 6, 2026. No country of manufacture is stated. Earthcore's release says the acquisition includes a 57,000-square-foot manufacturing and distribution facility in Indiana.
What burners does Firegear make?
Firegear's Pro Series puts brass burners in stainless pans, as round, square, linear H and linear T systems, and its standard line does the same in stainless steel. Pro Spur burners come in 10, 14 and 21 in, rated 80,000, 125,000 and 175,000 BTU on natural gas. Pro H burners run from 24 to 80 in, at 80,000 to 250,000 BTU on natural gas. Ignition is match throw, electronic AWS or thermopile TPSI.
Does Firegear make a fire table?
Yes. Sanctuary is Firegear's GFRC fire table and bowl series, with the Sanctuary 1-56, 1-76, 2 and 3. The product pages list outputs of up to 110,000 BTU for the 1-56, 150,000 for the 1-76, 145,000 for the Sanctuary 2 and 75,000 for the Sanctuary 3. The 1-56 is 56 x 38 in, and Firegear's installation manual lists 75,000 BTU on natural gas for it, so its own documents disagree.
What is the Firegear LUME smokeless fire pit insert?
The LUME is a stainless insert for wood-burning pits. Firegear describes it as a smokeless insert that turns an ordinary wood-burning fire pit into a cleaner-burning one. It drops into segmental retaining wall block, brick or other non-combustible pits in 29, 34 and 36 in. The line includes the LUME Insert, Double Wall Insert and Surround 1 and 2, and it is the one wood product in the line.
What is the Firegear Kalea Bay fireplace?
Kalea Bay is Firegear's outdoor gas fireplace with a steel firebox, in LED and battery models and see-through conversion kits. The 36, 48, 60 and 72 in models are listed at 31,000, 43,500, 50,000 and 65,000 BTU on natural gas at high. It runs on natural gas, convertible to propane, with electronic ignition. Its manual says it was approved to ANSI Z21.97-2017 / CSA 2.41 by the PFS agency under listing #20-024.
Not sold by Firepit HQ. Our store opens in 2027.
Sources
Each fact and collection on this page links to the page it came from, with the date we checked it.
- Firegear Outdoors, Contact pageChecked
- Earthcore Industries, press release dated 2026-02-06Checked
- Firegear Outdoors, Limited Warranty, a FlipBuilder document embedded on the warranty page (online.flipbuilder.com/gearhead/qwhm/); the page shows a last-modified date of 2026-02-06Checked
- Firegear Outdoors, Sanctuary Series page and its Sanctuary 1-56, 1-76, 2 and 3 product pagesChecked
- Firegear Outdoors, Sanctuary Series 1-56 installation manual (Rev. C), flexible piping section and accessories pageChecked
- Firegear Outdoors, Pro Series flat round and square spur installation manual (MT)Checked
- Firegear Outdoors, Pro Spur burners and burner kits manualChecked
- Firegear Outdoors, Pro H burners and kits installation manual (Rev. D)Checked
- Firegear Outdoors, Fire pit burner systems and Burners and kits pagesChecked
- Firegear Outdoors, Block Burner Systems pageChecked
- Firegear Outdoors, Sanctuary Series 1-56 installation manual (Rev. C)Checked
- Firegear Outdoors, Abode and Levelle pageChecked
- Firegear Outdoors, LUME Insert pageChecked
- Firegear Outdoors, Kalea Bay LED installation manualChecked
- Firegear Outdoors, AWS Ignition System pageChecked
More manufacturers
Related guides
Choosing a Gas Fire Pit
- Outdoor Fire Bowls and Fire-and-Water Bowls: Sizes, Plumbing
- Natural Gas Fire Pit Installation: Line, Shutoff, Permit
- Do Gas Fire Pits Give Off Heat? Will They Keep You Warm?
- Fire Glass vs Lava Rock: Heat, Cleaning and Burner Rules
- Fire Pit BTU Ratings: How Many BTUs Do You Need?
- Fire Pit Table Height: Chat, Coffee, Counter and Bar Heights
- Fire Pit Table With a Hidden Propane Tank: What to Check
- Gas Fire Pit Buying Guide: How to Choose the Right One
- Gas vs Wood Fire Pit: Heat, Cleanup and Burn Rules
- How Big Should a Fire Pit Be? Sizes, Seating and Height
- How Long Does a 20 lb Propane Tank Last on a Fire Pit?
- Linear Fire Pits: Sizes, BTU Output and Layout
- Natural Gas vs Propane Fire Pits: The Real Tradeoffs
- Fire Pit Materials: GFRC vs Corten vs Copper vs Steel
Placement and Fire Safety
Patio Heaters
Brands and Hardware
Hear When the Store Opens
We'll email you when the store opens in 2027.

